AS 1428.1:2009
$66.95
Design for access and mobility – General requirements for access – New building work
| Published By | Publication Date | Number of Pages |
| AS | 2009-11-27 | 117 |
Sets out minimum design requirements for new building work, as required by the Building Code of Australia (BCA), to enable access for people with disabilities. It covers aspects of access to and within a building.
Scope
This Standard specifies the design requirements for new building work, as required by the Building Code of Australia (BCA) and the Disability (Access to Premises – Buildings) Standards (Premises Standards), to provide access for people with disabilities. Particular attention is given to –
(a) continuous accessible paths of travel and circulation spaces for people who use wheelchairs;
(b) access and facilities for people with ambulatory disabilities; and
(c) access for people with sensory disabilities.
NOTE: The BCA and Premises Standards set out requirements for other features of the accessible built environment not covered in this Standard, such as lifts, hearing augmentation, tactile ground surface indicators, signage, glazing, lighting, car parking and toilet numbers, and distribution.
This Standard does not include requirements for –
(i) wheelchairs that have dimensions exceeding those shown in Figure 1; or
(ii) motorized scooters.
Related products
-
AS 4828.1:2009
Degradability of plastics – Methods of test – Determination of level of prodegradant ions Published…
-
AS 1528.1:2019
Stainless steel tubes and tube fittings for food processing and hygienic applications – Tubes Published…
-
AS 1528.2:2001
Tubes (stainless steel) and tube fittings for the food industry – Screwed couplings Published By…
-
IEEE 1450.1 2005
(Replaced) IEEE Standard for Extensions to Standard Test Interface Language (STIL) (IEEE Std. 1450-1999) for…
-
AS 1478.1:2000 (R2018)
Chemical admixtures for concrete, mortar and grout – Admixtures for concrete Published By Publication Date…
-
IEEE 1244.1-2000
IEEE Standard for Media Management System (MMS) Architecture Published By Publication Date Number of Pages…
-
AS 1418.18:2001
Cranes, hoists and winches – Crane runways and monorails Published By Publication Date Number of…
-
AS 1528.3:2001
Tubes (stainless steel) and tube fittings for the food industry – Butt weld tube fittings…
-
IEEE 1484.1-2003
IEEE Standard for Learning Technology – Learning Technology Systems Architecture (LTSA) Published By Publication Date…
-
AS 1428.1:2001
Design for access and mobility – General requirements for access – New building work Published…
-
AS 4123.1:2008
Mobile waste containers – Containers with two wheels and a capacity up to 400 L…
-
IEEE 1620.1-2006
IEEE Standard for Test Methods for the Characterization of Organic Transistor-Based Ring Oscillators Published By…
-
AS 5488.1:2019
Classification of subsurface utility information – Subsurface utility information Published By Publication Date Number of…
-
AS 4125.1:2009
Sound laboratory practice in food and water microbiology laboratories – Premises, safety, sample management, regulatory…
-
IEEE 1620.1-2006
IEEE Standard for Test Methods for the Characterization of Organic Transistor-Based Ring Oscillators Published By…
-
AS 1038.1:2001
Coal and coke – Analysis and testing – Higher rank coal – Total moisture Published…
-
AS 1418.8:2008 (R2018)
Cranes, hoists and winches – Special purpose appliances Published By Publication Date Number of Pages…
-
AS 4428.4:2004
Fire detection, warning, control and intercom systems – Control and indicating equipment – Intercommunication systems…
-
AS 2428.4:2004 (R2016)
Methods of testing smoke/heat release vents – Determination of the effect of flame contact Published…
-
AS 2428.1:2004 (R2016)
Methods of testing smoke/heat release vents – Determination of resistance to leakage during rain Published…
-
AS 1528.3:2019
Stainless steel tubes and tube fittings for food processing and hygienic applications – Butt weld…
-
AS 1528.4:2019
Stainless steel tubes and tube fittings for food processing and hygienic applications – Clamp tube…
-
AS 1418.5:2002
Cranes, hoists and winches – Mobile cranes Published By Publication Date Number of Pages AS…
-
AS 2828.1:2019
Health records – Paper health records Published By Publication Date Number of Pages AS 2019-07-24…
-
ISO 14281:2002
Aéronautique et espace — Calibres de contrôle, pour empreintes cruciformes avec ou sans saillies antidérapantes…
-
AS 1418.4:2004
Cranes, hoists and winches – Tower cranes Published By Publication Date Number of Pages AS…
-
AS 1473.1:2000
Woodprocessing machinery – Primary timber milling machinery Published By Publication Date Number of Pages AS…
-
BS ISO 14281:2002
Aerospace. Gauges, for internal cruciform ribbed or unribbed drives. Metric series Published By Publication Date…
-
AS/NZS 1428.4.1:2009
Design for access and mobility – Means to assist the orientation of people with vision…
-
AS 1121.1:2007
Agricultural tractor power take-offs – Rear-mounted power take-off types 1, 2 and 3 – General…
-
AS 1926.1:2007
Swimming pool safety – Safety barriers for swimming pools Published By Publication Date Number of…
-
AS 4482.1:2005
Guide to the investigation and sampling of sites with potentially contaminated soil – Non-volatile and…
-
AS/NZS 1429.1:2006 (R2017)
Electric cables – Polymeric insulated – For working voltages 1.9 (3.6) kV up to and…
-
AS 2428.5:2004 (R2016)
Methods of testing smoke/heat release vents – Determination of discharge coefficient and effective aerodynamic area…
-
AS 1418.1:2002
Cranes, hoists and winches – General requirements Published By Publication Date Number of Pages AS…
-
AS 1324.1:2001
Air filters for use in general ventilation and airconditioning – Application, performance and construction Published…
-
AS 1528.2:2019
Stainless steel tubes and tube fittings for food processing and hygienic applications – Screwed tube…
-
AS/NZS 1428.4:2002
Design for access and mobility – Tactile indicators Published By Publication Date Number of Pages…
-
AS ISO 128.1:2005 (R2016)
Technical drawings – General principles of presentation – Introduction and index Published By Publication Date…
-
AS 1988.1:2006
Welding of ferrous castings – Steel castings Published By Publication Date Number of Pages AS…
