Shopping Cart

No products in the cart.

TCNA A137.3 2022

$24.38

ANSI A137.3-2022, A108.19-2020 and A108.20-2020 American National Standard Specifications for Gauged Porcelain Tile and Gauged Porcelain Tile Panels/Slabs (Material and Installation Standards)

Published By Publication Date Number of Pages
TCNA 2022 84
Guaranteed Safe Checkout
Category:

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

American National Standard Specification A137.3 describes the minimum physical properties and grading procedures for gauged porcelain tiles and gauged porcelain tile panels/slabs. It provides quality criteria for buyers, specifiers, installers, manufacturers, and the public in general. ”Gauged” means manufactured to a thickness that is specific and largely associated with installation and use. Tile panels/slabs are those that are one square meter in facial area or larger. Some of the key issues addressed by this standard are: Floor, wall, and countertop strength criteria for “Table 4” gauged products that have a declared nominal thickness within the range of 5.0 to 6.5 mm Wall and countertop strength criteria for “Table 5” gauged products that have a declared nominal thickness within the range of 3.5 to 4.9 mm Floor, wall, and countertop strength criteria for “Table 6” gauged products that have a declared nominal thickness of 20 mm and greater Thickness accuracy and precision criteria Provisions for sampling and visual inspection, considering tile panels/slabs can be very large Provisions for gauged products with back layer reinforcing American National Standard A108.19 provides procedures and requirements for interior installation of gauged porcelain tiles and gauged porcelain tile panels/slabs. These products require unique installation and workmanship considerations, and some of the key issues addressed by this standard addresses include: Floor and wall installation procedures for ANSI A137.3 “Table 4” gauged products Wall installation procedures for ANSI A137.3 “Table 5” gauged products Substrate requirements Lippage criteria and use of lippage control systems Unique coverage criteria and evaluation procedures Special floor setting provisions that involve embedding by walking American National Standard A108.20 provides procedures and requirements for exterior installation of gauged porcelain tiles and gauged porcelain tile panels/slabs. These products require unique installation and workmanship considerations, and some of the key issues addressed by this standard addresses include: Exterior vertical and overhead installation procedures for ANSI A137.3 “Table 4” and “Table 5” gauged products Substrate requirements Lippage criteria and use of lippage control systems Unique coverage criteria and evaluation procedures Specific embedding instructions

PDF Catalog

PDF Pages PDF Title
21 ANSI A137.3 American National Standard Specifications for Gauged Porcelain Tile & Tile Panels/Slabs
1.0 Purpose
2.0 Scope
3.0 Definition of Terms
22 4.0 Procedures for Sampling, Testing and Basis for Acceptance
26 5.0 Acceptable Properties for Gauged Porcelain Tiles and Tile Panels / Slabs
34 6.0 Specialty Tiles or Tile Panels / Slabs
7.0 Grade Marking and Certification
35 8.0 Applicable Evaluation Procedures
51 ANSI A108.19 Interior Installation of Gauged Porcelain Tiles and Gauged Porcelain Tile Panels/Slabs
Introduction
Scope
1.0 Wall and Ceiling Substrates
52 2.0 Floor Substrates
3.0 Existing Surfaces/Substrates
4.0 Related Work Specified in Other Sections
53 5.0 Substrate Flatness
6.0 General Substrate Requirements
54 7.0 Jobsite Requirements
8.0 Material Handling Requirements
9.0 Tile Specifications and Ordering
55 10.0 Installing Contractor
11.0 General Requirements for Installation
56 12.0 Mortar and Mortar Mixing
13.0 Application of Bonding Mortar
57 14.0 Embedding the Tile
59 15.0 Required Mortar Coverage
16.0 Grouting of Tile
17.0 Workmanship, Lippage, and Grout Joint Size
60 18.0 Movement Joints
19.0 Damage to Tile Work
20.0 Maintenance
65 ANSI A108.20 American National Standard Specifications for Exterior Installation of Vertical and Ov
Introduction
Scope
1.0 Substrates
66 2.0 Existing Surfaces/Substrates
3.0 Related Work Specified in Other Sections
4.0 Substrate Flatness
5.0 General Substrate Requirements
67 6.0 Jobsite Requirements
7.0 Material Handling Requirements
68 8.0 Tile Specifications and Ordering
9.0 Installing Contractor
10.0 General Requirements for Installation
69 11.0 Mortar and Mortar Mixing
12.0 Application of Bonding Mortar
70 13.0 Embedding the Tile
71 14.0 Required Mortar Coverage
15.0 Grouting of Tile
16.0 Workmanship, Lippage, and Grout Joint Size
17.0 Movement Joints
72 18.0 Preventing Damage to Tile Work
19.0 Maintenance
75 Appendix A – Substrate Flatness – Required Plane
76 Appendix B – Shuffling Process for Embedding Gauged Porcelain
77 Appendix C
TCNA A137.3 2022
$24.38