ISO 7825:1985
$13.00
Shipbuilding — Deck machinery — General requirements
| Published By | Publication Date | Number of Pages |
| ISO | 1985-04 | 4 |
Specifies the characteristics common to all deck machinery of any type not detailed in the relevant specific International Standards. If in any items this Standard contradicts the specific International Standard, it shall be overruled by the specific International Standard.
Related products
-
ISO 7805-1:1984
Tôles perforées pour tamisage industriel — Partie 1: Épaisseur égale ou supérieure à 3 mm…
-
ISO 7425-2:1989
Hydraulic fluid power — Housings for elastomer-energized, plastic-faced seals — Dimensions and tolerances — Part…
-
AS ISO 7852:2021
Earth-moving machinery – Plough bolt heads – Shapes and dimensions (excluding thread dimensions) Published By…
-
BS 7125:1989
Specification for transformers for resistance welding machines Published By Publication Date Number of Pages BSI…
-
ISO 7845:1985
Horizontal joints between load-bearing walls and concrete floors — Laboratory mechanical tests — Effect of…
-
BS 6068-2.24:1986
Water quality. Physical, chemical and biochemical methods – Method for the determination of non-ionic surfactants…
-
BS 4540-2:1982
Sampling of spices and condiments – Method for preparation of a ground sample for analysis…
-
BS ISO/IEC 7826-1:1994:1995 Edition
Information technology-general structures for the interchange of code values – Identification of coding schemes Published…
-
BS 6783-6:1986
Sampling and analysis of nickel, ferronickel and nickel alloys – Method for determination of sulphur…
-
ISO 7852:1983
Earth-moving machinery — Plough bolt heads — Shapes and dimensions (excluding thread dimensions) Published By…
-
ISO 7824:1986
Shipbuilding and marine structures — Lubrication nipples — Cone and flat types Published By Publication…
-
BS 6620:1985
Guide for industrial plate screens of 3 mm thick and above Published By Publication Date…
-
BS 6490:1984
Specification for shapes and dimensions (excluding thread dimensions) of plough bolt heads for earth-moving machinery…
-
ISO 2825:1981
Spices and condiments — Preparation of a ground sample for analysis Published By Publication Date…
-
ISO 7805-2:1987
Tôles perforées pour tamisage industriel — Partie 2: Épaisseur inférieure à 3 mm Published By…
-
BS ISO 7425-2:2021
Hydraulic fluid power cylinders. Dimensions and tolerances of housings for elastomer-energized, plastic-faced seals – Rod…
-
ISO 7525:1985
Nickel — Determination of sulfur content — Methylene blue molecular absorption spectrometric method after generation…
-
ISO 7875-2:1984
Qualité de l’eau — Dosage des agents de surface — Partie 2: Dosage des agents…
-
SAE J 1580:2011
Metric Countersunk Holes for Cutting Edges and End Bits Published By Publication Date Number of…
-
BS EN 27828:1994:1985 Edition
Water quality. Methods for biological testing. Methods of biological sampling: guidance on handnet sampling of…
-
ISO 7895:1987
Facades made of components — Tests for resistance to positive and negative static pressure generated…
-
BS 6984:1988:1989 Edition
Specification for dimensions of housings for elastomer-energized plastic-faced hydraulic seals in reciprocating applications Published By…
-
BS 6620-1:1991:1992 Edition
Industrial plate screens – Guide for screens of thickness 3 mm and above Published By…
-
ISO 7285:1995
Vérins pneumatiques pour soudage multipoints mécanisés Published By Publication Date Number of Pages ISO 1995-12…
-
BS 6068-5-5.6:1985
Water quality. Biological methods – Evaluation in an aqueous medium of the ‘ultimate’ aerobic biodegradability…
-
BS ISO/IEC 7826-2:1994:1995 Edition
Information technology-general structures for the interchange of code values – Registration of coding schemes Published…
-
BS 5600-3.3:1987
Powder metallurgical materials and products. Methods of testing sintered metal materials and products, excluding hardmetals…
-
BS EN ISO 7625:2010
Sintered metal materials, excluding hardmetals. Preparation of samples for chemical analysis for determination of carbon…
-
ISO 7425-1:1988
Hydraulic fluid power — Housings for elastomer-energized, plastic-faced seals — Dimensions and tolerances — Part…
-
BS ISO 7425-1:2021
Hydraulic fluid power cylinders. Dimensions and tolerances of housings for elastomer-energized, plastic-faced seals – Piston…
-
ISO/TR 7821:1982
Tobacco — Preparation and constitution of identical samples from the same lot (Code of practice,…
-
AS/NZS 8825.1:1998
Information technology – ASN.1 encoding rules – Specification of basic encoding rules, canonical encoding rules…
-
BS EN ISO 7827:1996
Water quality. Evaluation in an aqueous medium of the ‘ultimate’ aerobic biodegradability of organic compounds.…
-
BS EN ISO 1927-1:2012
Monolithic (unshaped) refractory products – Introduction and classification Published By Publication Date Number of Pages…
-
ISO 7829:1986
Photography — Black-and-white aerial camera films — Determination of ISO speed and average gradient Published…
-
ISO 7828:1985
Water quality — Methods of biological sampling — Guidance on handnet sampling of aquatic benthic…
-
ISO/TR 8725:1988
Road vehicles — Transient open-loop response test method with one period of sinusoidal input Published…
-
BS EN ISO 7285:2021
Pneumatic cylinders for mechanized multiple spot welding Published By Publication Date Number of Pages BSI…
-
BS 6068-2-2.23:1986
Water quality. Physical, chemical and biochemical methods – Method for the determination of anionic surfactants…
-
BS 6963:1988
Open Systems Interconnection. Specification for basic encoding rules for Abstract Syntax Notation One (ASN.1) Published…