ISO 3862-2:2005
$27.95
Rubber hoses and hose assemblies — Rubber-covered spiral-wire-reinforced hydraulic types — Specification — Part 2: Water-based fluid applications
| Published By | Publication Date | Number of Pages |
| ISO | 2005-10 | 18 |
ISO 3862-2:2005 specifies requirements for five types of spiral-wire-reinforced hydraulic hose and hose assembly of nominal size from 6,3 to 51. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB at temperatures ranging from -40 °C to +60 °C.
This part of ISO 3862 does not include requirements for end fittings. It is limited to requirements for the performance of hoses and hose assemblies.
Related products
-
BS EN ISO 3262-20:2000
Extenders for paints. Specifications and methods of test – Fumed silica Published By Publication Date…
-
BS EN ISO 3861:2008:2009 Edition
Rubber hoses for sand and grit blasting. Specification Published By Publication Date Number of Pages…
-
BS 1795:1976
Specification for extenders for paints Published By Publication Date Number of Pages BSI 1976 24
-
ISO 3826-2:2008
Poches en plastique souple pour le sang et les composants du sang — Partie 2:…
-
BS EN ISO 3892:2001
Conversion coatings on metallic materials. Determination of coating mass per unit area. Gravimetric methods Published…
-
BS EN ISO 3262-20:2021
Extenders. Specifications and methods of test – Fumed silica Published By Publication Date Number of…
-
BS ISO 3842:2006 2007
Road vehicles. Fifth wheels. Interchangeability Published By Publication Date Number of Pages BSI 2007 14
-
ISO/PAS 28005-2:2009
Security management systems for the supply chain — Electronic port clearance (EPC) — Part 2:…
-
ISO/TR 17165-2:2006
Hydraulic fluid power — Hose assemblies — Part 2: Recommended practices for hydraulic hose assemblies…
-
ISO/IEC 14776-362:2006
Information technology — Small Computer System Interface (SCSI) — Part 362: Multimedia commands-2 (MMC-2) Published…
-
ISO 3864-2:2004/Amd 1:2011
Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product…
-
BS EN ISO 3262-19:2000
Extenders for paints. Specifications and methods of test – Precipitated silica Published By Publication Date…
-
BS ISO 1762:2001:2002 Edition
Paper, board and pulps. Determination of residue (ash) on ignition at 525°C Published By Publication…
-
JIS C 3662-1:2009
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V-Part 1: General…
-
BS 2463-1:1990
Transfusion equipment for medical use – Specification for collapsible containers for blood and blood components…
-
JIS C 3662-2:2009
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V – Part…
-
BS EN ISO 14896:2001:2002 Edition
Plastics. Polyurethane raw materials. Determination of isocyanate content Published By Publication Date Number of Pages…
-
BS EN ISO 3262-21:2000
Extenders for paints. Specifications and methods of test – Silica sand (unground natural quartz) Published…
-
BS ISO 3865:2005
Rubber, vulcanized or thermoplastic. Methods of test for staining in contact with organic material Published…
-
BS EN ISO 3262-8:2000
Extenders for paints. Specifications and methods of test – Natural clay Published By Publication Date…
-
BSI 21/30424715 DC:2021 Edition
BS ISO/IEC 15444-2. Information technology. JPEG 2000 image coding system – Part 2. Extensions Published…
-
BS EN ISO 3262-12:2001:2002 Edition
Extenders for paints. Specifications and methods of test – Muscovite-type mica Published By Publication Date…
-
BSI 15/30304071 DC:2015 Edition
BS ISO 3864-2. Graphical symbols. Safety colours and safety signs. Part 2. Design principles for…
-
ISO 8362-2:2008
Injection containers and accessories — Part 2: Closures for injection vials Published By Publication Date…
-
BS EN ISO 8362-2:2015+A1:2022
Injection containers and accessories – Closures for injection vials Published By Publication Date Number of…
-
BS EN ISO 3262-11:2000:2001 Edition
Extenders for paints. Specifications and methods of test – Natural talc, in lamellar form, containing…
-
BS EN ISO 3262-16:2000
Extenders for paints. Specifications and methods of test – Aluminium hydroxides Published By Publication Date…
-
BS EN ISO 8362-2:2015+A1:2022
Injection containers and accessories – Closures for injection vials Published By Publication Date Number of…
-
ISO 362-2:2009
Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 2: L…
-
ISO 3082:2009
Iron ores — Sampling and sample preparation procedures Published By Publication Date Number of Pages…
-
BS EN ISO 3822-1:1999+A1:2008:2009 Edition
Acoustics. Laboratory tests on noise emission from appliances and equipment used in water supply installations…
-
BS EN ISO 3262-10:2000:2001 Edition
Extenders for paints. Specifications and methods of test – Natural talc/chlorite in lamellar form Published…
-
ISO 3864-2:2004
Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product…
-
BS EN ISO 3262-18:2000
Extenders for paints. Specifications and methods of test – Precipitated sodium aluminium silicate Published By…
-
BS ISO 362-2:2009 2010
Measurement of noise emitted by accelerating road vehicles. Engineering method – L category Published By…
-
BS 2463-2:1989
Transfusion equipment for medical use – Specification for administration sets Published By Publication Date Number…
-
BS EN ISO 3262-17:2000
Extenders for paints. Specifications and methods of test – Precipitated calcium silicate Published By Publication…
-
ISO 8362-2:2015
Injection containers and accessories — Part 2: Closures for injection vials Published By Publication Date…
-
BS ISO 362-1:2007:2009 Edition
Measurement of noise emitted by accelerating road vehicles. Engineering method – M and N categories…
-
ISO 28005-2:2011
Security management systems for the supply chain — Electronic port clearance (EPC) — Part 2:…
