ASTM-D6298 2005(Redline)

$23.40

D6298-05e1 Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface (Redline)

Published By	Publication Date	Number of Pages
ASTM	2005	4

Guaranteed Safe Checkout

Categories: 91.100.50 - Binders. Sealing materials, ASTM

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

Description

Abstract

This specification covers fiberglass reinforced bituminous sheet materials modified by styrene-butadiene-styrene (SBS) thermoplastic elastomer, and are surfaced with a factory applied continuous metal foil. These materials are intended for use in the fabrication of multiple ply roofing and waterproofing membranes and flashings. This is intended as a material specification only, and does not address specific roof constructions or application techniques. The specified tests and property limits are intended to establish minimum properties. Roof system design criteria such as fire resistance, field strength, impact/puncture resistance, material compatibility, uplift resistance, and others are factors beyond the scope of this specification. The properties for which the materials shall be tested on and consequently conform to are thickness, net mass per unit, back surface coating thickness, peak load value, elongation at peak load, ultimate elongation, tensile-tear strength, low-temperature flexibility, dimensional stability, compound stability, cyclic thermal shock, water absorption, and moisture content.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope

1.1 This specification covers fiberglass reinforced modified bituminous sheet materials that use styrene-butadiene-styrene (SBS) thermoplastic elastomer as the primary modifier and are surfaced with a factory applied continuous metal foil. These materials are intended for use in the fabrication of multiple ply roofing and waterproofing membranes and flashings.

1.2 This specification is intended as a material specification only. Questions regarding the suitability of the specific roof constructions or application techniques are beyond the scope of this specification.

1.3 The specified tests and property limits are intended to establish minimum properties. In place roof system design criteria such as fire resistance, field strength, impact/puncture resistance, material compatibility, uplift resistance, and others, are factors beyond the scope of this specification.

1.4 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are for information only.

1.5 The following precautionary statement pertains to the test method portion only, Section 8 of this Specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

D1079 Terminology Relating to Roofing and Waterproofing D5147 Test Methods for Sampling and Testing Modified Bituminous Sheet Material D7051 Test Method for Cyclic Thermal Shock of SBS-Modified Bituminous Roofing Sheets with Factory-Applied Metal Surface

Keywords

glass reinforcement; metal foil surface; modified bituminous sheet; styrene-butadiene-styrene (SBS); thermoplastic elastomer; Bituminous materials/applications–specifications; Fiberglass–specifications; Fiberglass-reinforced bituminous sheet; Metal foil surface; Modified bituminous roofing/waterproofing materials; Roofing materials/applications–specifications; Styrene-butadiene-styrene (SBS) sheet; Thermoplastic roofing/waterproofing materials–specifications;

ICS Code

ICS Number Code 91.100.50 (Binders. Sealing materials)

DOI: 10.1520/D6298-05E01 ASTM International is a member of CrossRef.

ASTM D6298 (Roofing Standards)

Citing ASTM Standards

[Back to Top]

Additional information

Standard Title	D6298-05e1 Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface (Redline)
Published Code	ASTM
Publication Date	2005
Pages Count	4
ICS Codes	91.100.50 - Binders. Sealing materials

Preview PDF


PDF Format	Searchable	Printable	Preview Now

ASTM-D6298 2005(Redline)

ASTM D6298 (Roofing Standards)

Related products