ASTM-D2834 2008
$35.75
D2834-95(2008) Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes
| Published By | Publication Date | Number of Pages |
| ASTM | 2008 | 2 |
ASTM D2834-95-Reapproved2008
Historical Standard: Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes
ASTM D2834
Scope
1.1 This test method covers the determination of nonvolatile matter (total solids) in a water-emulsion, organic solvent-based liquid and paste floor polishes, and polymer-emulsion-type floor polishes.
1.2 This test method recognizes that the products may contain material that will slowly volatilize or change chemically with a resulting change in weight of the nonvolatile matter. Therefore, since drying to constant weight is impractical, specific drying times have been selected.
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Keywords
floor polishes; polymer-emulsion floor polishes; solvent-based floor polishes; water-emulsion floor polishes; Floor polish (water emulsion); Nonvolatile matter content–polishes; Polymer emulsion floor polishes; Solids content; Solvent-based floor polishes
ICS Code
ICS Number Code 71.100.99 (Other products of the chemical industry)
DOI: 10.1520/D2834-95R08
Related products
-
ASTM-D2234 2003
D2234/D2234M-03e1 Standard Practice for Collection of a Gross Sample of Coal Published By Publication Date…
-
ASTM-D2835 2007
D2835-89(2007) Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements Published…
-
ASTM-D2844 2007
D2844-07 Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils Published By…
-
ASTM-D2864 2002
D2864-02 Standard Terminology Relating to Electrical Insulating Liquids and Gases Published By Publication Date Number…
-
ASTM-D4834 2003
D4834-03 Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption…
-
ASTM-D2838 2009
D2838-09e1 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and…
-
ASTM-D2864 2006
D2864-06 Standard Terminology Relating to Electrical Insulating Liquids and Gases Published By Publication Date Number…
-
ASTM-D2837 2002
D2837-02 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials Published By…
-
ASTM-D2834 2002
D2834-95(2002) Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor…
-
ASTM-D2838 2009(Redline)
D2838-09 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and…
-
ASTM-D2838 2008
D2838-08 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and…
-
ASTM-D6834 2008
D6834-02(2008) Standard Test Method for Determining Product Leakage from a Package with a Mechanical Pump…
-
ASTM-D2837 2001
D2837-01 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials Published By…
-
ASTM-D2234 2009
D2234/D2234M-09 Standard Practice for Collection of a Gross Sample of Coal Published By Publication Date…
-
ASTM-D2837 2004
D2837-04e1 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure…
-
ASTM-E2834 2018
E2834-12(2018) Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle…
-
ASTM-D2734 2003
D2734-94(2003) Standard Test Methods for Void Content of Reinforced Plastics Published By Publication Date Number…
-
ASTM-D2844 2007
D2844-07e1 Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils Published By…
-
ASTM-D2835 2003
D2835-89(2003) Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements Published…
-
ASTM-D4834 2008
D4834-03(2008) Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption…
-
ASTM-D2384 2009
D2384-83(2009) Standard Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures Published By Publication…
-
ASTM-D4834 2008(Redline)
D4834-03(2008) Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption…
-
ASTM-D2844 2001
D2844-01 Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils Published By…
-
ASTM-D2434 2000
D2434-68(2000) Standard Test Method for Permeability of Granular Soils (Constant Head) Published By Publication Date…
-
ASTM-D2864 2000
D2864-00a Standard Terminology Relating to Electrical Insulating Liquids and Gases Published By Publication Date Number…
-
ASTM-D2234 2000
D2234-00 Standard Practice for Collection of a Gross Sample of Coal Published By Publication Date…
-
ASTM-D2854 2009
D2854-09 Standard Test Method for Apparent Density of Activated Carbon Published By Publication Date Number…
-
ASTM-D2832 2005
D2832-92(2005) Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings Published…
-
ASTM-D2804 2007
D2804-02(2007) Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography Published By…
-
ASTM-D2843 2004
D2843-99(2004) Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics…
-
ASTM-D2434 2006
D2434-68(2006) Standard Test Method for Permeability of Granular Soils (Constant Head) Published By Publication Date…
-
ASTM-D2864 2007
D2864-07 Standard Terminology Relating to Electrical Insulating Liquids and Gases Published By Publication Date Number…
-
ASTM-D2837 2001
D2837-01a Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials Published By…
-
ASTM-D2634 2007(Redline)
D2634-07 Standard Specification for Methyl Amyl Acetate (95 % Grade) (Redline) Published By Publication Date…
-
ASTM-D2837 2008
D2837-08 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure…
-
ASTM-D2824 2004
D2824-04 Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, Asbestos Fibered, and Fibered without Asbestos…
-
ASTM-D2734 2009
D2734-09 Standard Test Methods for Void Content of Reinforced Plastics Published By Publication Date Number…
-
ASTM-D2884 2007
D2884-93(2007) Standard Test Method for Yield Stress of Heterogeneous Propellants by Cone Penetration Method Published…
-
ASTM-D2839 2005
D2839-05 Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene…
-
ASTM-D2838 2018
D2838-18 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and…
