ASTM-B26 2009
$44.96
B26/B26M-09 Standard Specification for Aluminum-Alloy Sand Castings
| Published By | Publication Date | Number of Pages |
| ASTM | 2009 | 13 |
ASTM B26/B26M-09
Historical Standard: Standard Specification for Aluminum-Alloy Sand Castings
ASTM B26/B26M
Scope
1.1 This specification covers aluminum-alloy sand castings designated as shown in Table 1.
1.2 This specification is not intended for aluminum-alloy sand castings used in aerospace applications.
1.3 Alloy and temper designations are in accordance with ANSI H35.1/H35.1M. Unified Numbering System alloy designations are in accordance with Practice E 527.
1.4 Unless the order specifies the “M” specification designation, the material shall be furnished to the inch-pound units.
1.5 For acceptance criteria for inclusion of new aluminum and aluminum alloys and their properties in this specification, see Annex A1 and Annex A2.
1.6 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Keywords
aluminum; sand casting; Aluminum alloys (castings)–specifications; Sand castings (aluminum alloy); UNS A02010 (Aluminum foundry alloy, casting); UNS A02040 (Aluminum foundry alloy, casting); UNS A02080 (Aluminum foundry alloy, casting); UNS A02220 (Aluminum foundry alloy, casting); UNS A02420 (Aluminum foundry alloy, casting); UNS A02950 (Aluminum foundry alloy, casting); UNS A03190 (Aluminum foundry alloy, casting); UNS A07100 (Aluminum foundry alloy, casting); UNS A07120 (Aluminum foundry alloy, casting); UNS A07130 (Aluminum foundry alloy, casting); UNS A07710 (Aluminum foundry alloy, casting); UNS A08520 (Aluminum foundry alloy, casting); UNS A08500 (Aluminum foundry alloy, casting); UNS A08510 (Aluminum foundry alloy, casting); UNS A12420 (Aluminum foundry alloy, casting); UNS A13560 (Aluminum foundry alloy, casting); UNS A14430 (Aluminum foundry alloy, casting); UNS A18500 (Aluminum foundry alloy, casting); UNS A24430 (Aluminum foundry alloy, casting); UNS A33550 (Aluminum foundry alloy, casting); UNS A47120 (Aluminum foundry alloy, casting); UNS A03280 (Aluminum foundry alloy, castings); UNS A03550 (Aluminum foundry alloy, casting); UNS A03560 (Aluminum foundry alloy, casting); UNS A07070 (Aluminum foundry alloy, casting); UNS A04430 (Aluminum foundry alloy, casting); UNS A05120 (Aluminum foundry alloy, casting); UNS A05140 (Aluminum foundry alloy, casting); UNS A05200 (Aluminum foundry alloy, casting); UNS A05350 (Aluminum foundry alloy, casting); UNS A07050 (Aluminum foundry alloy, casting)
ICS Code
ICS Number Code 77.150.10 (Aluminium products)
DOI: 10.1520/B0026_B0026M-09
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents |
| 2 | Terminology Ordering Information TABLE 1 |
| 3 | Quality Assurance Manufacture TABLE 2 |
| 4 | Chemical Composition Material Requirements—Castings Produced for Governmental and Military Agencies Foundry Control—Castings Produced for Governmental or Military Agencies, or Both Tensile Properties Workmanship, Finish, and Appearance Number of Tests and Retests |
| 5 | TABLE 3 |
| 6 | Specimen Preparation TABLE 4 FIG. 1 FIG. 2 |
| 7 | Test Methods Heat Treatment Repair of Castings Repairing of Castings—Produced for Governmental and Military Agencies Source Inspection Foundry Inspection |
| 8 | Rejection and Rehearing Certification Identification and Repair Marking—Castings Produced for Government and Military Agencies Packaging, Marking, and Shipping Keywords A1. BASIS FOR INCLUSION OF PROPERTY LIMITS A1.1 |
| 9 | A2. ACCEPTANCE CRITERIA FOR INCLUSION OF NEW ALUMINUM AND ALUMINUM ALLOYS IN THIS SPECIFICATION A2.1 A2.2 X1. ALLOY PROPERTIES AND CHARACTERISTICS X1.1 |
| 10 | TABLE X1.1 |
| 11 | X2. SI UNITS X2.1 X3. INACTIVE ALLOYS X3.1 Alloys listed as inactive by the Aluminum Association TABLE X3.1 TABLE X3.2 |
| 12 | TABLE X3.3 |
Related products
-
ASTM-B265 2009
B265-09 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate Published By Publication…
-
ASTM-B265 2009
B265-09ae1 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate Published By Publication…
-
ASTM-B265 2009
B265-09a Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate Published By Publication…
